3.2.Station Name Assignment
A name may be assigned to each
To assign a name to a station:
a.Press MENU. The display will read “Phone Setting”
b.Press the soft key under ENTER.
c.Press the Down Arrow repeatedly until the display reads “Station Naming”
d.Press the soft key under ENTER. The display will show the currently stored name for station #01, or indicate “No Name” if no name has yet been given to station #01.
e.Press soft Key under CHANGE if you wish to store a new name for station #01, or press DOWN ARROW repeatedly until you see the station number that you want to name, and then press the soft key under CHANGE.
f.Use the dial pad numbers to enter the name for the desired station.
g.Press the soft key under SAVE.
Repeat steps “a” through “g” for any additional stations you wish to name.
After assigning a Station Name at Station #01, it may take twenty four hours to update all telephones.
The table below shows the dial pad numbers to press for different letters and special characters. Note that you can press the 0, *, and # buttons if you want those characters, and you can press the down arrow button below the display to leave an empty space. Press the DELETE button to make corrections.
0 | 0 |
|
|
|
|
|
|
|
|
1 | , | - | ' | & | . | ( | ) | 1 |
|
2 | A | B | C | a | b | c | 2 |
|
|
3 | D | E | F | d | e | f | 3 |
|
|
4 | G | H | I | g | h | i | 4 |
|
|
5 | J | K | L | j | k | l | 5 |
|
|
6 | M | N | O | m | n | o | 6 |
|
|
7 | P | Q | R | S | p | q | r | s | 7 |
8 | T | U | V | t | u | v | 8 |
|
|
9 | W | X | Y | w | x | y | 9 |
|
|
* | * |
|
|
|
|
|
|
|
|
# | # |
|
|
|
|
|
|
|
|
8