INSTALLINGYOUR TELEPHONE
DESK INSTALLATION
To install as a desk telephone, use the long modular line cord provided and refer to the diagram.
•On the bottom of the telephone base, locate the modular jack inside the cavity. Plug one end of the line cord into the jack.
•Route the cord as shown through the chan- nel to the back of the tele- phone base.
•Plug the unattached end of the line cord into the modular wall jack.
WALL INSTALLATION
To install a wall telephone, use the short modular line cord provided and refer to the diagram.
•On the bottom of the telephone base, locate the modular jack inside the cavity. Plug one end of the short line cord into the jack.
•While holding the telephone base close to the mount- ing location, plug the unattached end of the line cord into the modular wall jack. Excess line cord must be folded into the cavity.
•Note the two mounting studs on the modular wall jack. Align the telephone so that the two mounting studs are inserted into the two slotted holes in the telephone base. Slide the telephone down until it is tightly seated.
7
