FEATURESOFYOURTELEPHONE
Ringer Volume Control The
TONE/PULSE Switch The TONE/PULSE switch, located on the back of your telephone, is used to set the type of dialing for your telephone to match the local service from your telephone company. The 'P' position is for Pulse dialing service. The 'T' position is for Tone dialing service. (Some telephone companies cannot accept Tone dialing.)
Telephone Line Cord Jack Connect the modular line cord supplied with your telephone at this jack: long cord for desk installation; short cord for wall installation.
DATA PORT You can connect a data device (such as a modem) at the data port jack on the rear of the telephone to connect the device through the telephone network to a distant modem. The data port connects in parallel with the telphone line. While the modem is in use, incoming calls receive a busy signal.
Pushbutton Dial The pushbutton dial is used to dial numbers using either pulse or tone dialing.
4