Tools Needed:

5/16" Wrench

3/16" Allen wrench

1/2" socket and ratchet

1.Using a 5/16" Wrench, remove both Access Covers (Chipper and Drive Side) from the Chipper Box (Figure 1 on page 15).

2.Rotate the Chipper Disk using a stick until the three (3) countersunk Allen Screws and Lock Nuts attaching the Knife to the Flywheel are visible through the Access Openings.

3.Clean out the heads of the Allen Screws with an awl or sharp tool.

4.Insert a 3/16” Allen wrench into the head of a screw.

5.While holding the Allen wrench, remove the Lock Nut using a 1/2" socket.

6.Repeat Steps 4 and 5 for the remaining two (2) Allen screws.

7.Remove the dull or damaged Knife and visually inspect the Chipper Disk Slot and Knife mounting area and be sure they are clean and that the replacement Knife will be able to mount flush against the Chipper Disk.

8.Install a new or sharpened Knife and finger tighten the Allen screws and Lock Nuts (new hardware is supplied with a new Knife) to hold the Knife to the Chipper Disk.

9.Using a 3/16" Allen wrench and 1/2" socket, tighten the center Screw and Nut, then tighten the outer Screw and Nut, and finally tighten the inner Screw and Nut.

11.Double-check all three (3) screws for tightness one more time.

12.Check the gap between the Knife and Wear Plate. See “Adjusting the Knife to Wear Plate Gap” on page 40.

CALL TOLL FREE 1-800-DR-OWNER

39

Page 43
Image 43
Country Home Products 18 HP, 19HP manual Tools Needed

18 HP, 19HP specifications

Country Home Products has consistently been a leader in the outdoor power equipment industry, and their 19HP and 18HP models are prime examples of innovation and reliability. These models are specifically designed for homeowners and small-scale agricultural tasks, offering a range of features that enhance productivity and user comfort.

One of the standout features of both the 19HP and 18HP models is their robust engine performance. The 19HP model is equipped with a high-performance engine that offers exceptional torque and horsepower, allowing it to handle more demanding tasks with ease. On the other hand, the 18HP variant presents a slightly less powerful but still efficient engine that is ideal for typical gardening and landscaping needs. Both engines are designed for prolonged operation, ensuring they can tackle larger jobs without overheating.

Durability is another key aspect, with these models constructed from high-quality materials that resist wear and tear. The heavy-duty frames and reinforced components ensure that they can withstand the rigors of regular use in various outdoor conditions. Additionally, these models are designed with ease of maintenance in mind, featuring accessible components that simplify routine service and upkeep.

In terms of technology, both the 19HP and 18HP units incorporate advanced safety features, including user-friendly controls and automatic shut-off mechanisms that prevent accidental operation. The intuitive design enables operators to focus on their tasks without worrying about safety issues.

Customization options are also available, offering a range of attachments from tillers to snow blowers. This versatility allows users to transform their units to suit seasonal needs, making them valuable additions to any property. The ergonomic design of the controls and seating promotes user comfort during extended operation, ensuring that tasks can be completed efficiently without causing fatigue.

Furthermore, both models boast exceptional fuel efficiency, allowing users to complete more tasks without the constant need to refuel. This economical operation is complemented by low emissions, which make them environmentally friendly choices for homeowners aiming to reduce their carbon footprint.

In conclusion, Country Home Products’ 19HP and 18HP models stand out for their powerful performance, durability, and user-friendly design. They are ideal for a wide range of tasks, making them excellent investments for anyone looking to enhance their outdoor productivity while minimizing the environmental impact.