DR ALL-TERRAIN FIELD and BRUSH MOWER Safety & Operating Instructions 17
Stopping the Engine 1. Disengage the blade by pulling the blade control lever (see mower picture, Figure
1, on page 10) back to the DISENGAGED position.
2. Move the shift lever to the N (Neutral) position.
3. Move the throttle control to the IDLE position.
4. Turn the key to the OFF position and remove it for safety.
5. Set the parking brake.
Note: If your machine is equipped with a fuel shut-off valve, close it when
transporting or storing the mower.
Obstacle Tips Dealing with obstacles in the terrain is easy with your new DR ALL-TERRAIN FIELD
and BRUSH MOWER. The following section explains how to approach most common
obstacles.
■ Always check your work area before mowing and remove any debris that might tangle
or damage the machine.
■ If you do run into debris and the mower becomes tangled, turn off the engine and
disconnect the spark plug wire(s) before attempting to untangle the machine.
WARNING! The mower engine's power can easily throw stones,
sticks and other debris at great velocity, which could cause personal injury
or property damage. DO NOT run the machine over gravel driveways or
over loose stones or mulch with the mower blade s
p
innin
g
.