![](/images/new-backgrounds/1105638/10563857x1.webp)
Removing and Replacing the Belts
WARNING! Before performing any maintenance procedure, stop the engine and disconnect the spark plug wire(s).
Important! Use only DR belts on your machine. They have been thoroughly tested and proven for many hours of use.
To Replace the Blade Belt
1.Remove the black belt guard by unscrewing the black knob, lifting the cover, and pulling up and back to remove it.
2.Release the belt tension lever (Figure 13).
3.Remove the belt from the pulley (Figure 14), and then drop it from the engine pulley below the machine.
4.To mount the belt, follow the above procedure in reverse.
Belt Tension Lever
Figure 13
Belt Removed
Figure 14
DR | 25 |