To extract continuosly
To extract ionized water continuously, press the strong or weak alkaline button. Press the Ion water or cold mode button.(Make sure to confirm that the required ion water selection button is turned on.) If you press and hold the continuous extraction button for about 2 seconds, you can receive the selected ion water for about 1 minute.
When extracting water continuously, check if the ion water and cold mode buttons are turned off. (If you press a button that has been turned on again, the button is turned off.)
If you press and hold the continuous extraction button for about 2 seconds, you can receive water for about 2 minutes and 30 seconds.
| One more push on continuous extraction button | |
Tips | stops continuous extraction. | |
Ion water and cold ion water button is | ||
| ||
| automatically canceled after 10 seconds. |
-When the low water level indicator is turned on, the ion or cold ion water is not extracted.
▶To extract ionized water continuously
▶To extract filtrated water continuously
How to Use HOW TO USE Cold ion water L on water
Continuous | Button status | Continuous | Lamp status | |
extraction | extraction botton | |||
|
| |||
|
|
|
| |
|
| on |
| |
Cold ion water |
|
|
| |
|
| MedicalSubstanceGenerator |
| |
|
| Consultationwithadoctorisrequired. | WaterFiltrationDevice |
on
Ion water
MedicalSubstanceGenerator |
|
Consultationwithadoctorisrequired. | WaterFiltrationDevice |
Push and hold for 2
Ambient water Extract continuosly
seconds
DECO Lamp
flickering
on
Ambient water
MedicalSubstanceGenerator |
|
Consultationwithadoctorisrequired. | WaterFiltrationDevice |
16