PLEASE KEEP IN MIND
▶The summary for the proper installation of the water filtration system.
PREPARATIONS
▶Please check before use
How to Use
1Wind the teflon tape on the adaptor and fit it to the pipe.
Shall install the adaptor with connector on the cold water pipe.
Then, connect the faucet with the adaptor.
1
Connect the power to the voltage rating that matches it on the rating plate.
Then, open the feed valve to supply water to the filtration system.
Please Keep
2Connect orange tubing with the connector on the adaptor.
Flush water through each filter at least 5 minutes before connection.
3 Make a hole on the drain pipe |
and install the drain clamp |
■When the lamp on the
2indication parts are turned out
When the lamp on the indication parts are turned out please check the reason for break of electric supply in case of electricity failure or other conditions.
■Regular filter change
The regular filter change is very important to have clean water. The filter after life is ended may degrade the performance. Thus, do not miss the time for the filter change.
In Mind
/
Preparations
on the hole. |
4Connect the extraction fitting to the faucet with a tube.
5Connect the orange colored inlet tubing for the feed water with the cold water pipe. Extend the blue color outlet tubing to where the drain is.
6Connect it to voltage rating that matches it on the rating plate. Then, open the feed valve to supply water to the filtration system.
Outlet tubing 
Inlet tubing
Check the
3 Lamps!!
4 |
| When not using for a long time please lock the main water supply |
|
| valve and plug out the power cord. |
|
| |
|
| |
|
|
5
12 | 13 |
|
|
