How To Operate, Operation Part/Indication Part P-07FU/UV

1Plus Sediment ▶ filter(A) + Pre carbon

3UF Membrane ▶ filter replacement

Indicator	▶ 4 Water Shortage
	Indicator

HOW TO OPERATE

1 Put the extraction pipe in the desired position and place the cup under the extraction faucet to collect the water.

2Turn the faucet on and off depending on

desired use of filtered water.

How to Use

Operation Part / Indication Part

1 Plus Sediment filter(A) + Pre carbon filter(B) replacement Indicator

The light lights up when Plus Sediment filter and Pre carbon filter replacement are needed. Change the filter when the time of incoming signal on.

3 UF Membrane filter replacement Indicator

The light lights up when a UF Membrane filter replacement is needed. Change the filter when the time of incoming signal on.

2Post carbon filter replacement Indicator

The light lights up when a Post carbon filter replacement is needed. Change the filter when the time of incoming signal on.

4Water Shortage Indicator

In case of water shortage, the water shortage LED lights up.

3Water extraction automatically stops after

eight minutes to prevent too much use of
water or overflowing around the product	�
caused by user’s carelessness.	�
After repeating for four cycles, this device
will auto flush and then shut off.
(Only P-07FR/RV)

4If the system does not work when the faucet is opened, push the restart button

for one seconds to restart extraction.

(Only P-07FR/RV)

The influent water should not include any organic solvents because they may damage RO membrane polymer and may decrease the performance of RO

※The“Water Shortage Indicator”lights up when a UV Lamp filter replacement is needed. Change the filter when the time of incoming signal on.

membrane.