I. iAUDIO | 10. Detailed Controls |
Hold
Placing the HOLD latch to ‘ON’ makes all buttons inoperative and thus prevents the player from accidental pressing of buttons.
While HOLD is ‘ON’, the power cannot be turned on. Make sure that HOLD is ‘OFF’ before turning power on.
**The HOLD of remote control is different from that of iAUDIO.
The HOLD of remote control has an effect on the button of remote control ONLY.
HOLD message will not be displayed in iAUDIO’s LCD when the HOLD of remote control is on.
Voice Recording
First, switch to Voice Recording Mode and press | (or | on remote control) to start recording. | |
To stop recording, press | once again. |
|
|
A voice file (SC4 file) is created in voice album. When recording from FM Radio Mode, the recording file (SC4 file) is saved as the last file in the voice album. Therefore, to listen to the recording file, you must switch to Voice Recording Mode.
Connecting to PC
When USB cable is connected to PC for downloading files onto iAUDIO, ‘PC Connected’ appears in the LCD window and mode switches to PC Connection Mode.
While iAUDIO is connected to PC, tracks cannot be played. Therefore, if you want to listen to tracks, you must unplug the USB cable from iAUDIO.
Low Battery
If battery is low, the battery icon in the LCD window starts to blink, and when battery is completely out, iAUDIO will be automatically turned off.
While iAUDIO is connected to PC through the USB cable, power will be supplied to iAUDIO from PC. However, the battery must be inserted in iAUDIO although it will not be consumed.
One, All, and Ran Repeat Modes may cause the player to keep playing continuously and this will cause quick consumption of battery power. Therefore, make sure to turn the power off while not in use.
CW300 | 17 |
