Cowon Systems O2PMP - page 28

28 COWON O2PMP
+ The player does not turn on or work properly.
- If this is from discharged battery, fully charge the battery before use.
- If the problem persists after the battery has been charged, press the RESET button next to the SD card slot and turn on the player again.
- If the system folder is removed, apply the latest firmware available at COWON’s website (http://www.COWON.com).
+ When I turn on the player after formatting the system, it displays “X” on the screen and does not work.
- You must select FAT 32 for the file system when formatting. After formatting, apply the latest firmware available at COWON’s website
(http://www.COWON.com).
+ The .system folder is removed so the player does not work.
- If the system folder is removed, apply the latest firmware available at COWON’s website (http://www.COWON.com).
+ The touchscreen does not work.
- Check if the power switch is positioned to “HOLD”. If yes, the touchscreen will not work.
+ There is no sound from the speaker.
- Check if the output is set to Speaker in SETUP - Sound - Output. If it is set to Earphone, there will not be any sound from the speaker.
- Check if the volume level is set to 0. And if so, adjust it to your preference.
+ Key or button operation is delayed during playback of a movie or music file.
- When the player plays a file, it operates in low power mode to save power consumption. It will return to the normal mode in 3-4 seconds.
+ Troubleshooting