CRADLEPOINT IBR650 USER MANUAL Firmware ver. 3.3.0
Page 1: General
Tunnel Name: Choose a name that is meaningful to you.
Local Network: This is the local side of the ―Glue Network,‖ a network created by the administrator to form the tunnel. The user creates the IP address inputted here. It must be different from the IP addresses of the networks it is gluing together.
Choose any private IP address from the following three ranges that doesn‘t match either network:
∙10.0.0.0 - 10.255.255.255
∙172.16.0.0 - 172.31.255.255
∙192.168.0.0 - 192.168.255.255
Remote Network: This is the remote side of the ―Glue Network.‖ Again, the user must create an IP address that is distinct from the IP addresses of the networks that are being glued together.
The Remote Network and Local Network values will be flipped when inputted for the other side of the tunnel configuration.
Subnet Mask: This is the subnet mask for the Glue Network. The Local and Remote Network addresses must fit with this mask. 255.255.255.0 is a logical choice for most users.
Remote Gateway: This is the public facing,
Tunnel Enabled: Select to activate the tunnel.
© 2011 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 78 |
