CRADLEPOINT IBR650 USER MANUAL Firmware ver. 3.3.0
Tunnel Enabled: Enabled or Disabled.
MBR1200 Quick Connect: VPN tunnels in the IBR650 have more choices than they do in the MBR1200, so it is more complex to configure. Check this box to simplify setup by streamlining your options.
7.7.2Page 2: Networks
Local Network: The Network IP address and the Subnet Mask define what local devices have access to or can be accessed from the VPN tunnel. The IBR650 will automatically fill in the values for your network, but you can change the values to limit the tunnel to only some of the devices in your network.
NOTE: The local network IP address must be different from the remote network IP address.
Remote Network: Enter the remote Gateway's IP address or fully qualified domain name (my.domain.com). It is recommended you use a dynamic DNS host name instead of the static IP address. By using the dynamic DNS host name updates of the remote WAN IP are compensated for while connecting to a VPN tunnel.
Enter the Network IP address with the Subnet Mask to define the remote network subnet that the local devices will have access to.
NOTE: The remote network IP address must be different from the local network IP address.
© 2011 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 89 |
