Cradlepoint MBR1400 Getting Started continued, Connect to a Computer or other Network Equipment

Getting Started (continued) 8

4. Connect to a Computer or other Network Equipment.

In order to access the MBR1400, establish a connection to the router. Connect wirelessly to the WiFi broadcast, or with an Ethernet cable connected to your computer and then plugged into one of the Orange Ethernet ports.

The default WiFi network name broadcast will be seen as “MBR1400-xxx”, where “xxx” is the last three characters of your router’s MAC address, shown as SSID on the product label.

To connect to the WiFi, you will need to input the default password when prompted.
The default password is provided on the product label
			Model No.: MBR1400
found on the bottom of your router (see example below).			Part No.: MBR1400
			H/W ver.: 1.0
			www.cradlepoint.com
	Default Password :	440c1fc1
5. Use.	MAC Address : 0030440c1fc1

For most users, the MBR1400 Router can be used	Serial No.: MM100167900418			FCC ID:UXX-MBR1400
				IC: 6921A-MBR1400
immediately without any special configuration changes. If	SSID: MBR1400-fc1
you would like to change your network name, level of WiFi				RoHS
security, etc. follow the First Time Setup Wizard steps on	MFG DATE: NOV 2010
	Made in Taiwan	12V	1.5A	R01
page 9.