BEVEL RIPPING

This cut is a combination of ripping while having the blade bevel angle is set to an angle other than "0".

WARNING

Cutonlywiththeworkpieceand thefenceon theright sideoftheblade.

RIPPING SMALL PIECES

I_WARNING

AvoidinjuryfromthebladecontactNever. make

through saw cuts narrower than 1/2" wide.

1.It is unsafe to rip small pieces. Instead, rip a larger piece to obtain the size of the desired piece.

2.When a small width is to be ripped and your hand cannot be safely put between the blade and the rip fence, use one or more push sticks to move the workpiece.

CROSSCUTTING (FIG. Y)

WARNING

To preventseriousinjury:

•Do notallowfamiliarityorfrequentuse ofyourtable saw tocausecarelessmistakes.Remember that

even a carelessfractionofa second isenough to cause a severe injury.

•Keep both hands away from the blade and the path of the blade.

1.Remove the rip fence and place the miter gauge in the left side groove.

2.Adjust the blade height so it is 1/8" higher than the top of the workpiece.

3.Hold the workpiece firmly against the miter gauge

with the blade path in line with the desired cut location. Keep the workpiece away from the blade.

4.Start the saw and wait for the blade (1) to come up to full speed.

5.Keep the workpiece (2) against the face of the miter gauge (3) and flat against the face of the gauge and flat against the table. Then slowly push the workpiece through the blade. (Fig. Y)

6.Do not try to pull the workpiece back with the blade turning. Turn the switch OFF, and carefully slide the workpiece out when the blade is completely stopped.

USING WOOD FACING ON THE MITER GAUGE (Fig. Y-l)

Slots are provided in the miter gauge for attaching an auxiliary facing (1) to make it easier to cut very long or short pieces. Select a suitable piece of smooth wood, drill two holes through it and attach it the miter gauge face with screws. Make sure the facing does not interfere with the proper operation of the sawblade guard. When cutting long workpieces, you can make a simple support by clamping a piece of plywood to a sawhorse.

Fig. Y-1

BEVEL CROSSCUTTING (FIG. Z)

This cutting operation is the same as crosscutting except the blade is at bevel angle other than 0°.

1.Adjust the blade (1) to the desired angle, and tighten the blade bevel lock knob.

2.Always work to the left side of the blade. The miter gauge (3) must be in the left side groove (2). It cannot be used in the right side groove unless

the miter angle is very sharp, as it will interfere with the blade auard.

2

COMPOUND MITER CROSSCUTTING (FIG. AA) This sawing operation is combining a miter angle with a bevel angle.

1.Set the miter gauge (3) to the desired angle. Use only the left side groove (2).

2.Set the blade (1) bevel to the desired angle then lock in position.

3.Carefully push the miter gauge to begin the cutting operation.

Fig. AA

3 2

1

Page 17 Page 19
Page 18
Image 18
Craftsman 137.248830 Bevel Ripping, Ripping Small Pieces, Crosscutting FIG. Y, Bevel Crosscutting FIG. Z
Page 17 Page 19

137.248830 specifications

The Craftsman 137.248830 is a versatile and powerful table saw that has garnered attention among DIY enthusiasts and professional woodworkers alike. With its robust construction and user-friendly features, it stands out as a reliable choice for tackling a variety of woodworking projects.

One of the main attributes of the Craftsman 137.248830 is its precision. It comes equipped with a 10-inch blade that offers excellent cutting capabilities for a wide range of materials, including hardwood, plywood, and softwood. The saw utilizes a direct drive motor that delivers a powerful 15-amp output, ensuring consistent and efficient cutting performance.

Safety is a priority in this model, featuring an integrated blade guard system that protects users during operation. The saw also includes a riving knife, which helps prevent kickback by keeping the material aligned with the blade, enhancing overall safety while making cuts. Additionally, the push stick and safety switch are designed to further minimize risk, making it suitable for users of various skill levels.

Another prominent feature is its adjustable dual-sided fence system, which provides accurate and secure measurements for precise cuts. The fence can be easily adjusted, making it ideal for rip cuts as well as crosscuts. Furthermore, the measuring scale is clear and easy to read, allowing woodworkers to set up their projects quickly.

Portability is another characteristic that stands out. The Craftsman 137.248830 is designed with a foldable stand, making it easy to transport to job sites or store when not in use. Despite its sturdy construction, the saw remains lightweight enough for easy maneuverability.

Moreover, the onboard storage provides convenient access to all necessary tools, such as blades and wrenches, keeping everything organized . The dust port is also a noteworthy feature; it helps maintain a clean workspace by connecting to a dust extractor, which is essential for creating a safe working environment.

In summary, the Craftsman 137.248830 table saw combines power, precision, and safety features, making it a fantastic addition to any woodworking shop. Its reliable performance, user-friendly design, and portable nature cater to both amateur and professional woodworkers seeking quality in their tools.
Top Page Image Contents