operate from either the Waft Cent,rot or the remote control:

Having a ProbJem?

Probable Cause and Solution

1Does the opener have electdc power? Plug a _ampinto the outlet. _tit doesn'tlight, check the fuse box or Me @rcuitbreaker (Some outlets are centre/ted by a w@I switdq,)

2.Have you d sabred all d_×_rk_ks? Review installation instnsction w_onings on Page 11.

3.is there a buiid_up of Joe or snow under the door? The door may be frozen to the ground Remove any restriction

4.The garage door spring may be broken. Have it repkaced.

5.Repeated opera£ion may have tdpped the ovedoad prote_tor in the motor. Wait 15 minutes. Try again_

from the remote control_ but not from the Wall Controh

from the Wail Control, but net from the remote centre#

!_sthe Wail Centre//it? If not, remove the bell wire from the opener terminal screws. Short the red and whte terminals by touching both terminals at the _sme time with a piece of wire _fthe opener runs, cheek for a faulty wire connection at the Wall Centre!, a short under the staples, or a broken wire.

2Are the wiring connections correct? Review Step 6, page 18.

1.If your model has the Lock feature, make sure the lock is Off.

2.Is any wall push button flashing? Your opener needs to redeam a remote controi cede Refer to InstnJctions on the opener p_neL

3.Does the battery test light glow when the remote control push button is pressed? _f not, replace the bakery.

4.Program the r(xseiver to match the remote control code.

5 Repeat the receiver programming procedure with aft remote controls.

_ee remote control 1. Check the battery test light, if the light is d{m, replace the bakery 2_ Change the Iocation of the remote centre{ {r_yourcar_

3.Check to be sure. the antenna on the side or back panel of opener extends fully downward

4.Some instailations may have sho_er range due to a meta_ door, toil backed insulation, or metal garage siding

If operational n_se is a problem because of proximity of the opene_ to the _iving

disturbing in tiring quarters, the Vibration iselator Kit 41A3263 can be installed. This kit was designed to

quatt_,rs of homo: minimize vibration to the house and is easy to install

The garage door1. Be sure that a{I remote control push bu_ons and battery indi_'_tor!ights are off,

2Remove the bell wire from the Wall Control terminals and operate from the remote

control on_y_If this so!yes the problem, the Wall Contrei is faulty (replace), or there is an intermittent sho_ on the wire beb_een the Wall Control and the opener

The door doesn't

1. If the door has been woAing

propedy but now doesn't open a_ithe way, increase t_he

open completely:

up force. See page 29.

 

 

2. Is something obstructing the door? Remove the obstruction or repair the door_

 

3, if door opens at least 5 feet, the trove! limits may need to be increased One turn

 

equats 2 inches of travel See page 28.

 

Repeat the safety reverse test after the adjustment is complete.

 

Review the travel iimits adiustment procedures on page 28.

doesn't close

Repeat

the aafo_ reverse test

after any adjustment of door arm length, close

 

force or

down limit.

 

34

Page 33 Page 35
Page 34
Image 34
Craftsman 139.53425SRT, 139.53325SRT manual Having a ProbJem?, Probable Cause and Solution
Page 33 Page 35

139.53425SRT, 139.53325SRT specifications

The Craftsman 139.53325SRT and 139.53425SRT are two state-of-the-art garage door openers developed to enhance convenience, security, and efficiency in home access. Designed with the latest technologies, these models cater to the evolving needs of users looking for reliable and advanced solutions for their garage doors.

One of the standout features of both the 139.53325SRT and 139.53425SRT is their powerful motor system, which ensures smooth and quiet operation. These garage door openers are equipped with a 1/2 HP motor, providing ample power for standard-sized garage doors while minimizing noise during operation. This is particularly beneficial for homes with living spaces adjacent to the garage, offering a peaceful environment without disruptive sounds.

Smart technology integration is another significant characteristic of these models. Both openers are compatible with Craftsman's Smart Control technology, allowing users to operate and monitor their garage doors remotely through a smartphone app. This feature not only enhances convenience but also improves security, enabling homeowners to check the status of their garage door from anywhere and receive alerts for any unusual activity.

The 139.53325SRT and 139.53425SRT also boast advanced safety features. They come with the Guardian® safety system, which automatically reverses the door if an obstruction is detected, preventing potential accidents. Additionally, these models are equipped with a rolling code technology that changes the access code after each use, enhancing security against unauthorized access.

Installation and operation are user-friendly, thanks to the included instructional manuals and straightforward setup processes. Craftsman has focused on making their openers accessible to DIY enthusiasts, which means homeowners can typically install these models without professional assistance.

In terms of durability, both models are built to withstand the test of time, featuring strong, weather-resistant materials that ensure long-lasting performance. This is particularly important for those in areas with harsh weather conditions.

In conclusion, the Craftsman 139.53325SRT and 139.53425SRT garage door openers combine power, advanced technology, and user-friendly features to provide a top-tier solution for homeowners. With their focus on safety, security, and convenience, these models stand out as exceptional choices in the garage door opener market.
Top Page Image Contents