About the Code Reader
DISPLAY FUNCTIONS
5.MIL icon - Indicates the status of the Malfunction Indicator Lamp (MIL). The MIL icon is visible only when a DTC has commanded the MIL on the vehicle's dashboard to light.
6.Pending icon - Indicates the currently displayed DTC is a "Pending" code.
7.PERMANENT icon - Indicates the currently displayed DTC is a “Permanent” code.
8.FREEZE FRAME icon - Indicates that “Freeze Frame” data has been stored in the vehicle’s computer for the currently displayed DTC.
9.ABS icon - Indicates that the currently displayed DTC is an “ABS” code.
10.Code Number Sequence - The Code Reader assigns a sequence number to each DTC that is present in the computer's memory, starting with "01.” This helps keep track of the number of DTCs present in the computer's memory. Code number "01" is always the highest priority code, and the one for which "Freeze Frame" data has been stored.
11.Code Enumerator - Indicates the total number of codes retrieved from the vehicle’s computer.
12.Monitor icons - Indicates which Monitors are supported by the vehicle under test, and whether or not the associated Monitor has run its diagnostic testing (Monitor status). When a Monitor icon is solid, it indicates that the associated Monitor has completed its diagnostic testing. When a Monitor icon is flashing, it indicates that the vehicle supports the associated Monitor, but the Monitor has not yet run its diagnostic testing.
The I/M Monitor Status icons are associated with INSPECTION and MAINTENANCE (I/M) READINESS STATUS. Some states require that all vehicle Monitors have run and completed their diagnostic testing before a vehicle can be tested for Emissions (Smog Check). A maximum of eleven Monitors are used on OBD 2 systems. Not all vehicles support all eleven Monitors. When the Code Reader is linked to a vehicle, only the icons for Monitors that are supported by the vehicle under test are visible on the display.
Craftsman 14063 | 7 |
,
