Craftsman 152.22018 owner manual Know Your Bench Grinder

KNOW YOUR BENCH GRINDER

6

4 7

13

5

10B 10A

9

2

8 11

14

13

1.WHEEL GUARD - Covers the grinding wheels and protects against accidental contact.

2.WHEEL COVER - Covers the grinding wheels and provides access for routine maintenance.

3.MOTOR HOUSING - Contains the electrical motor.

4.EYESHIELD MOUNTS - Supports the eyeshields.

5.EYESHIELDS - Protective Lexan see-thru shields to prevent any loose debris from contacting the operator.

6.FLEXIBLE WORK LIGHT - Provides assistance to the operator for grinding operations.

7.SPARK ARRESTORS - Prevents hot sparks and debris from contacting the operator.

8.TOOL REST ADJUSTABLE SUPPORTS - Lets the operator position the tool rest closer to the wheel as the wheel decreases in diameter due to wear.

9.TOOL RESTS - Used to support the workpiece that is being ground. Adjustable to provide angled surfaces.

10.A) GRINDING WHEEL 120 GRIT - Used to remove light material from workpiece.

10.B) GRINDING WHEEL 60 GRIT - Used to remove heavy material from workpiece.

11.ON / OFF SWITCH - Used to turn “ON” and turn “OFF” the grinder.

12.WHEEL DRESSER - Used to clean and smooth surface of the 8" Grinding Wheel (not shown).

13.QUENCH TRAY - Used to cool workpiece after grinding.

14.MOUNTING PAD - Used to secure the grinder to a workbench or suitable work surface.

15.GRINDING WHEEL IDENTIFICATION LABEL - Provides information on wheel size, grit and maxi- mum RPM. Must be left on to distribute the load of tightening the Lock Nuts (not shown).

16.ARBOR BUSHING - Used when wheels have an oversized wheel bore (not shown).

17.FLANGES - Used to secure the grinding wheels to the grinder and distribute the load of the Lock Nuts (not shown).

18.LOCK NUT - Used to secure the grinding wheels to the grinder (not shown).

8