Oil cylinder bore

After you have drained the fuel tank, protect the inside of the engine as follows:

Remove spark plug, pour approximately one ounce (30 ml) of engine oil into spark plug hole, and crank slowly to distribute oil.

WARNING: Avoid spray from spark plug hole when cranking the engine slowly.

Replace spark plug; do not connect spark plug wire.

Change oil

Change oil if it has not been changed in the last three months. For instructions on how to change oil refer to the Maintenance section of this manual.

Clean engine

Clean engine and remove any grass clippings, dirt, or chaff from the exterior of the engine.

Remove any dirt or debris from cooling fins, air intake screen, levers, and linkage.

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if it starts to rust. Rust and/or dirt in the gasoline will cause problems. Store unit in a clean, dry area. Do not store next to corrosive materials, such as fertilizer.

NOTE: If storing in an unventilated or metal storage shed, be certain to rustproof the equipment by coating with a light oil or silicone.

18

Page 18
Image 18
Craftsman 247.38824 owner manual Oil cylinder bore, Change oil