islikelythattheshreddingbladeand/orchipper bladesaredullandneedtobesharpenedor
replacedRefertoServiceandAdjustmentssection.. IMPORTANT:Thereisaflailscreenlocatedinside
thehousinginthedischargearea.Iftheflailscreen
becomesclogged,removeandcleanasinstructedin
theServiceandAdjustmentssection.
velocityKeep.away from the area around the discharge chute. Always stop the engine and disconnect spark plug wire when removing or attaching the bag, changing containers, or removing the shredded material. Wear safety glasses and gloves whenever using your
Shred material upto 1 inch in diameter
/
Catch shredded material in catcher bag
Lower the hopper to collect raked material for shredding
Chip material upto 3 inches in diameter
Figure 12
1. GENERAL RECOMMENDATIONS
oAlways observe safety rules when performing any maintenance.
oThe warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from
the warranty, operator must maintain the chipper- shredder as instructed in this manual.
Some adjustments will need to be made periodically to maintain your unit properly.
All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.
Follow the maintenance schedule given below. Periodically check all fasteners and make sure these are tight.
WARNING: Always stop the engine and disconnect the spark plug wire before performing any maintenance or adjustments. Never remove discharge
chute till the engine has completely stopped.
11
