Craftsman 247.77763 Removing From Carton, Loose Parts, Tools Required, Disconnecting Spark Plug

		IMPORTANT: This unitis shipped without gasoline
		or oil in the engine. After assembly, see
		OPERATION sectionof this manual for proper fuel
		and engine oil flU-up.
	Left	NOTE: To determine right and left hand sides of your
		_1--chipper-shredder vacuum, stand beh=indthe unit with
		the engine farthest away fromyou.
		Your chipper-shreddervacuumhas been completely
Right		assembled at the factory,except for the nozzle, the
		chipper chute with support bracket and the catcher bag.
	Front	These parts are shipped loose in the carton. A pair of
		safety glasses and a 20-oz. bottle of engine oil are also
		includedin the carton.

	Chipper Chute
Catcher Bag	with Support Bracket

20-oz. Bottle
of Engine Oil	Nozzle
	Figure I
Spark Plug
Wire

Figure 2

Removing From Carton

Cut the corners of the carton. Remove all packing inserts.

Remove aUloose parts. See Figure 1.

Push down on handle to lift front of chipper- shredder vacuum and roll unit out of the carton.

Make certain all parts and literature have been removed before the carton is discarded.

Loose Parts

(See Figure 1.)

1.Nozzle

2.Chipper Chute with Support Bracket

3.Catcher Bag

4.Safety Glasses (Not Shown in Figure 1 )

5.A 20-oz. Bottle of Engine Oil

Tools Required

t.1/2" or adjustablewrenches

2.7/16" or adjustablewrenches

3.Funnel(Recommended)

4. Pliers ; ,b

Disconnecting Spark Plug

(See Figure 2.)

Before proceedingwith assembly of your new chipper-shreddervacuum unit, disconnectthe spark plug wire from the spark plug on the engine and move it away. This willprevent accidental starting ofthe engine in any way.

5