SERVICE AND MAINTENANCE

ENGINE MAINTENANCE

WARNING

Before lubricating, repairing, or inspecting, disengage all controls and stop engine. Wait until all moving parts have come to a complete stop.

Checking Engine Oil

NOTE: Check the oil level before each use to be sure correct oil level is maintained.

When adding oil to the engine, refer to viscosity chart below. Engine oil capacity is 600 ml (approx. 20 oz.). Do not over-fill. Use a 4-stroke, or an equivalent high detergent, premium quality motor oil certified to meet or exceed U.S. automobile manufacturer’s requirements for service classification SG, SF. Motor oils classified SG, SF will show this designation on the container.

1.Remove the oil filler cap/dipstick and wipe the dipstick clean.

2.Insert the cap/dipstick into the oil filler neck, but do not screw it in.

3.Remove the oil filler cap/dipstick. If level is low, slowly add oil until oil level registers between high (H) and low (L). See Figure 12.

4.Replace and tighten cap/dipstick firmly before starting engine.

Fill between high and low marks

Figure 12

Changing Engine Oil

NOTE: Change the engine oil after the first 5 hours of operation and once a season or every 50 hours thereafter.

1.Drain fuel from tank by running engine until the fuel tank is empty. Be sure fuel fill cap is secure.

2.Place suitable oil collection container under oil drain plug.

3.Remove oil drain plug. See Figure 13.

4.Tip engine to drain oil into the container. Used oil must be disposed of at a proper collection center.

CAUTION

Used oil is a hazardous waste product. Dispose of used oil properly. Do not discard with household waste. Check with your local authorities or Sears Service Center for safe disposal/recycling facilities.

5.Reinstall the drain plug and tighten it securely.

6.Refill with the recommended oil and check the oil level. See Recommended Oil Usage chart. The engine’s oil capacity is 20 ounces.

Synthetic

0W-30

5W-30

-40º -20º 0º 20º 40º -30º -20º -10º

Oil Drain

Plug

Figure 13

CAUTION

DO NOT use nondetergent oil or 2-stroke engine oil. It could shorten the engine’s service life.

7.Reinstall the oil filler cap/dipstick securely.

CAUTION

Thoroughly wash your hands with soap and water as soon as possible after handling used oil.

16