Craftsman 315.114073 manual Symbol Name DESIGNATION/EXPLANATION

Some of the following symbols may be used on this worklight. Please study them and learn their meaning. Proper interpretation of these symbols wirl allow you to operate the tool better and safer.

SYMBOL	NAME	DESIGNATION/EXPLANATION
V	Volts	Voltage
A	Amperes	Current
Hz	Hertz	Frequency (cycles per second)
W	Watt	Power
min	Minutes	Time
"_	Alternating Current	Type of current
---=	Direct Current	Type or a characteristic of current
no	No Load Speed	Rotational speed, at no load
[]	Class II Construction	Double-insulated construction
.../min	Per Minute	Revolutions, strokes, surface speed, orbits etc., per minute
	Wet Conditions Alert	Do not expose to rain or use in damp locations.
	Read The Operator's Manual	operator's manual before using this product.
		To reduce the risk of injury, user must read and understand
Q	Eye Protection	Always wear safety goggles or safety glasses with side
		shields and a full face shield when operating this product.
_,	Safety Alert	Precautions that involve your safety.
	No Hands Symbol	serious personal injury.
		Failure to keep your hands away from the blade will result in
	No Hands Symbol	Failure to keep your hands away from the blade will result in
		serious personal iniury.
	No Hands Symbol	Failure to keep your hands away from the blade will result in
		serious personal injury.
_J_	No Hands Symbol	Failure to keep your hands away from the blade wilt result in
		serious personal injury.
	Hot Surface	To reduce the risk of injury or damage, avoid contact with
		any hot surface.

6