PRODUCT | SPECIFICATIONS |
|
|
| 315,115200 | 315.115210 | |
Chuck |
| 3/8 in. Keyless | 3/8 in. Keyiess |
Motor |
| 13.2 Volts | 15.6 Volts |
Gear Train |
| One Speed | One Speed |
Switch |
| Variable Speed | VariabJe Speed |
No Load Speed | |||
Battery |
| 130139018 | 130139015 |
Maximum | Torque | 100 in.lb. | 110 in.lb. |
Charger |
| 140287001 | 140250013 |
Rating |
| 120 V, 60 Hz,AC only | 120 V, 60 Hz,AC only |
Charge Rate | |||
Clutch |
| 24 Positions | 24 Positions |
KNOW THIS TOOL
See Figure 1,
Before attempting to use this tool, familiarize yourself with all operating features and safety requirements.
KEYLESS CHUCK
This tool has a keyless chuck that allows you to hand tighten or release drill bit in the chuck iaws.
SWITCH
To turn this tool ON, depress the switch trigger. Release switch trigger to turn your
SWITCH LOCK
The switch trigger can be locked in the OFF position. This feature helps reduce the possibility of accidental starting when not in use.
VARIABLE SPEED
This tool has a variable speed switch that delivers higher speed with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
This tool has a forward/reverse selector located above the switch trigger.
WRIST STRAP
A wrist strap is provided to reduce the chances of drop- ping your tool. Place one hand through the wrist strap when carrying tool.
BIT STORAGE
When not in use, bit(s) provided with this tool can be placed in the storage area located on the top of the motor housing.
_ WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal iniury.
8
