Craftsman 11593 manual Groovein Batteryport, Lithium-Ion, Depressboth Latchesto, LOCK-0N, Switch

TO iNSTALL BATTERY PACK

See Figure 3.

[] Place the battery pack in the tool.

[] Make sure the latches on each side of the battery pack snap into place and the battery pack is secured on the tool before beginning operation.

CAUTION: When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the spotlight and latches into place properly. Improper installation of the battery pack can cause damage to internal components.

A WARNING: Always remove battery pack from your tool when you are assembling parts, making adjust- ments, cleaning, or when not in use. Removing bat- tery pack will prevent accidental starting that could cause serious personal injury.

TO REMOVE BATTERY PACK

See Figure 3.

[] Depress the latches on the side of battery pack.

[] Remove the battery pack.

ALIGNRAISEDRiB ON

BATTERYPACKWITH

GROOVEIN BATTERYPORT

DIEHARD®19.2 V

LITHIUM-ION

BATTERYPACK

DEPRESSBOTH

LATCHESTO

RELEASE CRAFTSMAN19.2 V

NICKEL-CADMIUM

BATTERYPACK

Fig. 3

LOCK-0N

BUTTON

SWITCH

TRIGGER

Fig. 4

SWITCH TRIGGER

See Figure 4.

To turn the spotlight ON, depress and hold the switch trigger. To turn it OFF, release the switch trigger.

LOCK=ON BUTTON

See Figure 4.

The spotlight is equipped with a lock-on feature, which

is convenient for continuous use for extended periods of time.

To lock-on:

[] Depress the switch trigger.

[] Push forward and hold the lock-on button, located on the top of the handle.

[] Release the switch trigger.

[] Release the lock-on button.

[] To release the lock, depress and release the switch trigger.

_IL WARNING: Never leave the spotlight in the locked- on position and unattended. Failure to heed this warning could result in serious injury or property damage.