Craftsman 315.11726 manual Lockingonthe Sander

LOCKINGONTHE SANDER

See Figure 8.

The lock-on feature allows you to lock the trigger switch in the On position. Locking the trigger switch on allows you to operate the sander for extended periods of time.

If you have the lock-on feature engaged during use and the sander is accidentally disconnected from the power supply, disengage the lock-on feature immediately.

Also, do not lock the trigger switch if you might need to suddenly stop the sander.

,_ WARNING: Before connecting the sander to a power supply, make sure it is not in the locked-on

position. Failure to do so could result in accidental starting of the tool resulting in serious injury.

Follow these steps to lock on the sander.

•Depress the trigger switch.

•Push in the lock-on button.

•Release the trigger switch.

•Release the lock-on button.

Note: To release the lock, depress the trigger switch.

OPERATING THE SANDER

See Figure 9.

Follow these steps to operate the sander.

•Secure the work to prevent it from moving under the sander.

_L WARNING: Unsecured work could be thrown towards the operator causing injury.

•Turn the sander on and let the motor reach its maximum speed before placing the sander on the work surface.

•Lower the sander to the work surface with a slight forward motion.

•Move the sander slowly over the work surface, using the rear handle to control the sander and the front handle to guide the sander.

Note: Allowing the sander to remain in one place will result in an uneven surface.

_, WARNING: Keep a firm grip on the sander with both hands at all times. Failure to do so could

result in loss of control leading to possible serious injury.

We designed the sander to provide the proper weight on the sanding belt. Excessive pressure will result in the following:

•Uneven work

•Clogged sanding belts

•Premature sanding belt wear

•Possible motor burnout

•Irregular sanding belt tracking

Fig. 9

13