Craftsman 315.11726 manual Symbol Name DESIGNATION/EXPLANATION, Min, Symbol Meaning

-- = m

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

SYMBOL	NAME	DESIGNATION/EXPLANATION
V	Volts	Voltage
A	Amperes	Current
Hz	Hertz	Frequency	(cycles	per second)
W	Watt	Power
min	Minutes	Time
"%'	Alternating Current	Type of current
no	No Load Speed	Rotational speed,		at no load
[]	Class II Construction	Double-insulated		construction
/min	Per Minute	Revolutions,	strokes, surface		speed,	orbits etc. per minute
	Safety Alert	Precautions	that involve your		safety
O	Eye Protection	wear safety goggles or safety				glasses with side shields
		Alwaysand full face shield when operating this product.
	Wet Conditions Alert	Do not expose to rain or use in damp				locations.
=
--				T

The purpose of safety symbols is to attract your attention to possible dangers.		The safety		symbols, and the
explanations with them, deserve your careful attention and understanding.	The safety	warnings	do	not by themselves
eliminate any danger. The instructions or warnings they give are not	substitutes	for proper	accident prevention

measures.

SYMBOL

,_

,t_

A

MEANING

DANGER:serious injuryIndicates. an imminently hazardous situation, which, if not avoided, will result in death or

seriousWARNING:injuryIndicates. a potentially hazardous situation, which, if not avoided, could result in death or

CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices that may cause property damage.

Important: Advises you of important information or instructions vital to the operation or maintenance of the equipment.

Note: Advises you of additional information concerning the operation or maintenance of the equipment.

5