DEPTH OF CUT ADJUSTMENTS WHEN

ROUTER IS MOUNTED TO A ROUTER TABLE

See Figure 7.

The depth of cut is readable from both sides of the depth indicator ring. The bottom ring is convenient when using your router mounted upside down to a router table. The indicator point on the base can also be used when using your router mounted to a router table.

Set the cutter at zero depth of cut, rotate depth indicator ring to desired depth of cut on the scale, then tighten locking knob securely.

FORROUTERTABLEUSEONLY

INDICATOR'_DEPTH

POINTINDICATORRING Fig. 7

ROUTER TABLES

The use of Craftsman routers on router tables offered by other manufacturers has not been investigated for compliance with applicable safety standards,

,_ WARNING: Do not use with router tables that fail to conform to safe wood working practices

and offer proper guarding for the cutter. Failure to comply can result in an accident causing possible serious injury.

PRACTICE BEFORE ACTUAL USE

We suggest that you practice with your router before installing a cutter and making cuts in wood. Check the following before connecting your router to power supply.

•Make sure power supply Is 120 volts, 60 Hz, AC only.

•Make sure the spindle lock is in the unlocked position.

•Make sure the trigger is not in the lock-on position.

•Make sure there is not a cutter in the ccllet.

•Make sure the collet does not extend below the subbase.

•Plug your router into power supply.

•Grasp your router firmly with both hands and turn on.

HELPFUL HINTS

J' Always clamp workpiece securely before routing. ,/ A safe operator is one who thinks ahead.

,/ Always wear eye protection when routing.

,/ Make setup adjustments carefully. Then double check. Measure twice and cut once.

,/ Keep cutters clean and properly sharpened.

•/ Don'tlet familiarity make you careless.

,/ Study all safety rules and do the job safely.

JNever place your hands in jeopardy.

JMake certain clamps can'tloosen while in use.

,/ Test difficult setups on scrap --Don'twaste lumber.

V" Plan each operation before you begin.

/Provide for smoother operation by cleaning your router frequently. Shake router or blow with an air

jet to remove sawdust buildup. J' Think safety by thinking ahead.

ROUTING

See Figure 8.

For ease of operation and maintaining proper control, your router has two handles, one on each side of the router base. When using your router hold it firmly with both hands as shown in Figure 8.

Tum router on and let motor build to its full speed, then gradually feed cutter into workpiece. Remain alert and watch what you are doing. Do not operate router when fatigued.

HANDLE

,OWER

Fig. 8

_1= WARNING: Keep a firm grip on router with both hands at all times. Failure to do so could result in

loss of control leading to possible serious injury.

9

Page 8 Page 10
Page 9
Image 9
Craftsman 315.175 owner manual Indicatordepth, Router Tables, Practice Before Actual USE, Helpful Hints, Routing
Page 8 Page 10

315.175 specifications

The Craftsman 315.175 is a versatile and robust power tool that has earned a solid reputation among DIY enthusiasts and professionals alike. Designed for various woodworking tasks, this model is particularly esteemed for its exceptional performance and user-friendly features.

One of the standout attributes of the Craftsman 315.175 is its powerful motor. Engineered to deliver substantial torque, the motor ensures maximum efficiency while tackling heavy-duty tasks. This power enables the tool to perform flawlessly across a range of applications, from home improvements to intricate craft projects.

The Craftsman 315.175 is equipped with an ergonomic design, which enhances user comfort during prolonged use. Its lightweight construction allows for easy maneuverability, reducing fatigue and improving overall control. The soft-grip handle provides additional comfort and grip, making it easier to handle the tool with precision.

This model features advanced technologies that set it apart from competitors. Notably, its quick-release blade change system allows users to swap out blades swiftly and effortlessly. This technology not only saves time but also enhances safety, as users can replace blades without the need for additional tools.

The Craftsman 315.175 also includes adjustable speed settings, providing users with the flexibility to adapt to various materials and tasks. Whether cutting through hardwood or softwood, users can select the optimal speed to achieve the desired results. This adaptability makes the tool suitable for a wide range of projects, from rough cuts to detailed finishing work.

Durability is another key characteristic of the Craftsman 315.175. Constructed with high-quality materials, this tool is designed to withstand the rigors of demanding use. The robust build ensures longevity, making it a reliable choice for both casual users and professional tradespeople.

Safety features are integral to the design of the Craftsman 315.175. With an integrated safety switch and blade guard, users can operate the tool with greater peace of mind. These features minimize the risk of accidents, allowing users to focus entirely on their projects.

In summary, the Craftsman 315.175 is a powerful, versatile, and user-friendly tool that caters to a broad spectrum of woodworking needs. Its robust motor, ergonomic design, quick-release blade change system, adjustable speed settings, and safety features collectively make it a top choice for anyone seeking efficiency without compromising on safety. Whether for professional use or DIY projects, the Craftsman 315.175 stands out as a dependable and effective tool.
Top Page Image Contents