FEATURES
KNOW YOUR TRIM SAW
See Figure 1.
Before attempting to use your trim saw, familiarize yourself with all operating features and safety requirements.
Features include easily operated bevel cut and depth of cut adjustment mechanisms; positive 0° bevel stop; spindle lock; and blade wrench storage.
WARNING: Carefully read through this entire owner’s manual before using your new trim saw. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. If you use your trim saw properly and only for what it is intended, you will enjoy years of safe, reliable service.
Your trim saw has been shipped completely assembled except for the blade. Inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest Sears Retail Store to obtain replacement parts before attempting to operate saw. A blade, blade wrench (5 mm hex key), rip guide (edge guide) and this owner's manual are also included.
WARNING: Do not allow familiarity with your saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
SWITCH
Your saw is equipped with a
APPLICATIONS
(Use only for the purposes listed below)
■Cutting all types of wood products (lumber, plywood, paneling).
WARNING: If any parts are missing, do not operate your saw until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
PRODUCT SPECIFICATIONS:
TRIM SAW | 315.271190 |
Blade Diameter | |
Blade Arbor | 5/8 in. (16 mm) |
Cutting Depth at 90° | |
Cutting Depth at 45° | |
No load Speed | 2,500 RPM |
Motor | 18 Volts DC |
CHARGER | ITEM NO. |
| |
Input | 120 v, 60 Hz, AC only |
Charging Voltage | 9.6 - 24 Volts |
Charge Rate | 1 Hour |
BATTERY PACK | ITEM NO. |
|
7
