TROUBLESHOOTING
| MOTOR WILL NOT START |
|
|
| C A U S E |
| A C T I O N |
1. | Unit is unplugged | 1. | Make sure that extension cord is securely plugged |
|
|
| into cultivator's cord outlet receptacle on one end |
|
|
| and a 110V outlet on the opposite end. |
2. | Starter button or bail improperly used | 2. | Press starter button and hold it in while squeezing |
|
|
| bail against the handle. |
3. | Overload protection switch has popped out | 3. | Depress overload protection switch. Follow starting |
|
|
| instructions. |
NOTE: For repairs beyond the minor adjustments listed above, contact your nearest Sears Parts & Repair center
| SPECIFICATIONS |
MOTOR |
|
Engine Type | AC 120 Volts Electric |
Operating RPM | up to 8,000 rpm |
Ignition Switch. | Bail Lock Safety Button |
Amperage | 6.5 Amps |
Overload Protection | 120 V 5 amp Breaker |
CULTIVATOR* |
|
Drive Shaft Tube | Steel Tube |
Handle | Steel Tube |
Cultivating Path Width (Maximum) | 9 inches (22.86 cm) |
Cultivating Depth (Maximum) | 6 inches (15.24 cm) |
Approximate Weight .... | 27 lb. (12.25 kg) |
*All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.
13
