Craftsman 33731 manual Assembly And Operation, Carton CONTENTS, TOOLS required

ASSEMBLY AND OPERATION

WARNING

Before installing this accessory, shut the engine off and allow it to cool. Disconnect the spark plug wire from the spark plug. Refer to the mower’s Operator’s Manual for complete safety instructions. Do not operate the mower without the entire grass bag in place. Turn the mower off and disconnect the spark plug before emptying the grass bag.

Carton CONTENTS

Before installing this accessory, remove all parts from the carton. Carton contents, including items included within the hardware pack, are shown in Figures 1 and 2. Part numbers are shown in parentheses and each item has been identified with a letter code, [X], for use when following the assembly instructions. Reference to right or left side of the mower is observed from the operating position.

TOOLS required

Two 7/16” wrenches or two adjustable wrenches, and one set of pliers.

[A] - Grass bag (764-04052)

[B] - Chute Assembly (931-04239)

[D] - Rod Hanger (747-04671)

[E] - Rod Bracket (787-01569-0637)

[C]- Rod Assembly (647-04110-0637)

Figure 1

[G] - Lock Cap Nut, 1/4-20 (Qty. 4)

(712-0442)

[F] - HH Cap Screw,	[H] - Washer (Qty. 8)
1/4-20 x 1.75” (Qty. 4)
	(736-0463)
(710-0136)

[I]- Cable Tie (Qty. 1) (726-0209)

Figure 2 - Contents of the hardware pack.

Installing the RIGHT Side Bracket

1.Shut off engine and disconnect the spark plug wire.

2.Loosen the four star knobs by turning the knobs counterclockwise five full rotations, Figure 3.

Figure 3

Removing the Right Side Hardware

3.Remove the following from the right side of the upper handle, Figure 4. The hardware removed can be discarded.

•Two 1/4-20 screws

•Two flat washers

•Two 1/4-20 cap lock nuts

Figure 4