Craftsman 33731 manual Assembly And Operation, Installing the LEFT Side Bracket

ASSEMBLY AND OPERATION

Installing the Right Bracket

4.Align holes in rod assembly [C] with holes in panel and secure with the following items from the hardware pack, Figure 5:

•Two 1/4-20 x 1.75” screws [F]

•Four flat washers [H]

•Two 1/4-20 cap lock nuts [G]

C

G

F

H

H

Figure 5

Installing the LEFT Side Bracket

Remove the Left Side Hardware

5.Remove the following from the left side of the upper handle, Figure 6. The hardware removed can be discarded.

•Two 1/4-20 screws

•Two flat washers

•Two 1/4-20 cap lock nuts

Installing the Left Bracket

6.Align holes in rod bracket [E] with holes in panel while placing end of rod assembly [C] through the bracket. Secure with the following items from the hardware pack, Figure 7:

•Two 1/4-20 x 1.75” screws [F]

•Four flat washers [H]

•Two 1/4-20 cap lock nuts [G]

Figure 6

E

Tightening the handle knobs

7.Tighten the four star knobs loosened in step 2.

C

F

H G

H

Figure 7