CUSTOMER | RESPONSIBILITIES |
|
|
|
|
|
| ||||
_WARNING: |
| Disconnect the | spark plug before performing | maintenance | |||||||
except | for carburetor | adjustments. |
|
|
|
|
| ||||
Filt in dates | as you complete | Before | After | Ever | Every |
| Service | ||||
regular service |
|
| Use | Use | 5 hrs | 25 hrs. | Yeady | Dates | |||
Check | for damaged/worn | parts | .,I |
|
|
|
|
| |||
Check | for | loose fasteners/parts |
|
|
|
|
|
| |||
Check | chain | tension |
| i_" |
|
|
|
|
| ||
Check | chain | sharpness |
| _' |
|
|
|
|
| ||
Check | guide | bar |
|
| _' |
|
|
|
|
| |
Check | fuel | mixture | leveI |
| _' |
|
|
|
|
| |
Check | guide | bar and chain oit | _'_ |
|
|
|
|
| |||
Inspect | and | ctean | unit &decaIs |
| _" |
|
|
|
| ||
Check | chain | brake |
|
|
|
| /I |
|
|
| |
CIean | guide | bar groove |
|
|
|
|
|
|
| ||
Clean air filter
C_ean/inspect muffler and spark arresting screen
Replace spark plug and fueI filter
GENERAL RECOMMENDATIONS
The warranty on this unit does not cov- er items that have been subjected to operator abuse or negligence. To re- ceive futt vatue from the warranty, the operator must maintain unit as instructed in this manual, Various ad- justments wilt need to be made period- icaHy to propedy maintain your unit.
•Once a year, replace the spark plug, air filter, and check guide bar and chain for wear. A new spark plug and air fitter assures proper
and helps your engine run better and last _onger.
CHECK FOR DAMAGED OR WORN PARTS
Contact your Sears Service Center for reptacement of damaged or worn parts. NOTE: It is norma_ for a smalt amount of
oiI to appear under the saw after engine
stops. Do not confuse this with a leaking oit tank.
•ON/STOP Sw_tch - Ensure ON/STOP switch functions properly by moving the switch to the STOP position. Make sure engine stops; then restart engine and continue.
_'_
_-
•Fuet Tank - Do not use saw if fuel tank shows signs of damage or leaks.
•Oil Tank - Do not use saw if oil tank
shows signs of damage or leaks.
CHECK FOR LOOSE FASTENERS AND PARTS
•Bar Knob
•Chain
•Muffler
•Cylinder Shield
•Air Fitter
•Handle Screws
•Vibration Mounts
•Starter Housing
•Front Hand Guard
CHECK CHAIN TENSION
_WARNING:Wear protective
gloves when handling chain. The chain is sharp and can cut you even when it is not moving.
Chain tension is very important, Chains stretch during use. This is especiatty true during the first few times you use your saw. A}ways check chain tension each time before you start the chain saw.
1.Use a screwdriver to move chain
around guide bar to ensure kinks do not exist. The chain should ro-
tate freeSy.
14
