KNOW YOUR BRUSHCUTTER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments, Save this manual for future reference,
| be |
_T_ | Hanger |
Trimmer Shield
Blade Shield
BLADE
The BLADE is designed for cutting grass, weeds, and brush up to 1/2 inch
mdiameter.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line and is designed for cutting grass and light weeds.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler which enables optional attach- ments to be installed. The optional at-
tachments | are: |
Edger | 358.792400 |
Cultivator | 358.792410 |
Blower | 358.792421 |
WARNING: Always disconnect
powerhead spark plug before remov- ing or installing attachments.
REMOVING BRUSHCUTTER AT* TACHMENT (OR OTHER OPTIONAL ATTACHMENTS)
CAUTION: When removing or instal-
BLADE SHIELD
The BLADE SHIELD provides protection from the spinning blade.
TRIMMER SHIELD
The TRIMMER SHIELD provides protec- tion from the spinning trimmer head.
Upper Tube
Coupler
Lower \LOOSEN
Attachment
TIGHTEN Knob
2.Press and hold the locking/release button.
ling attachments, place the powerhead and attachment on a flat surface for
stability.
Lower Attachment
UpperTube
1.Loosen the coupler by turning the knob counterclockwise.
3.While securely holding the upper tube, pull the attachment straight out of the coupler.
10
