2, Insertandthreadthe4mounting screwsthroughtheholesofthe _earboxandthemetalshield.

ightenevenlyandsecurelywith thehexwrenchprovided,

INSTALLATION OF THE METAL BLADE

_l_ WARNING: Wear protective

gloves when handling or performing maintenance on the blade to avoid in-

jury. The blade is sharp and can cut you even when it is not moving.

_I_WARNING: Do not use any

blades, or fastening hardware other than the washers and nuts shown in the fol-

lowing illustrations. These parts must be provided by Sears and installed as

shown below. Failure to use proper parts can cause the blade to fly off and seri-

ously hurt you or others.

NOTE: The dust cup and retaining washer are located on the gearbox shaft and not in the parts bag. All other fas- teners mentioned in the following as- sembly steps are in the parts bag.

1.Remove the retaining washer from the threaded shaft of the gearbox. Leave the dust cup on the shaft.

2.Install the blade and the retaining washer over the threaded shaft.

3.Make sure the raised part of the re- taining washer is facing the gearbox and the raised area fits into the hole in the center of the blade.

4.Slide the blade and retaining washer onto the shaft of the gear- box.

5.Place the cupped washer onto the shaft. Make sure the cupped side of the washer is toward the blade.

6.Install the blade nut by threading onto the shaft counterclockwise.

Gearbox

Shield

\

Dust Cu

Threaded Shaft

Blade

Retaining

Washer ---_

Cupped__

Washer

_",_-_ Nut

NOTE: Make sure all parts are in place as illustrated, and the blade is sand- wiched between the dust cup and the retaining washer. There should be no space between the blade and the dust cup or the retaining washer.

7.Align hole in dust cup with hole in side of gearbox by rotating the blade.

8.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while tightening the blade nut.

9.Tighten blade nut firmly with a wrench while holding screwdriver in position.

10.Remove the screwdriver.

11.Turn blade by hand. If the blade binds against the shield, or ap- pears to be uneven, the blade is

not centered, and you must rein- stall.

NOTE: To remove blade, insert screw- driver into aligned holes. Unthread the nut and remove parts. Be sure to store parts and instructions for future use.

Page 8 Page 10
Page 9
Image 9
Craftsman 358.792441 manual Ightenevenlyandsecurelywith thehexwrenchprovided, Installation of the Metal Blade
Page 8 Page 10

358.792441 specifications

The Craftsman 358.792441 is a versatile and powerful tool designed for outdoor use, particularly renowned for its performance in lawn care and garden maintenance. This string trimmer positions itself as an essential companion for homeowners and landscaping professionals alike, allowing for efficient trimming of grass and weeds in hard-to-reach areas.

One of the standout features of the Craftsman 358.792441 is its robust 29cc gas-powered engine. This engine delivers ample power, enabling the trimmer to handle tough vegetation with ease. The 2-cycle engine design not only provides reliable performance but also ensures that the tool remains lightweight and easy to maneuver, crucial for long trimming sessions.

The Craftsman 358.792441 is equipped with an automatic line-feed system. This technology allows for a hassle-free experience, automatically feeding the cutting line as needed, reducing downtime for manual adjustments. The dual-line cutting system enhances operational efficiency, allowing for a wider cutting path that speeds up the trimming process.

Another significant characteristic of this trimmer is its adjustable straight shaft design. This feature allows users to customize the length of the tool for maximum comfort, ensuring that it can be used effectively by individuals of varying heights. The straight shaft also provides better reach into tight spaces and under bushes, making it a practical choice for thorough landscaping tasks.

The Craftsman 358.792441 also showcases a user-friendly starting system. The Easy Start technology minimizes pull resistance, making it easier to start the engine, which is particularly beneficial for users who are not accustomed to operating gas-powered tools. Additionally, its comfortable, ergonomic handle design reduces user fatigue during extended use, allowing for greater control and precision.

In terms of durability, the construction of the Craftsman 358.792441 is designed to withstand the rigors of frequent outdoor use. With a sturdy build and quality components, this trimmer offers longevity and reliability that users can depend on season after season.

Overall, the Craftsman 358.792441 combines power, efficiency, and user-friendly features, making it an excellent choice for anyone looking to maintain their lawn or garden. Whether you are a homeowner or a professional landscaper, this trimmer provides the performance and ease of use needed to tackle a variety of outdoor tasks effectively.
Top Page Image Contents