KNOWYOURELECTRIC BLOWER

READ THIS OPERATOR'SMANUAL AND SAFETY RULES BEFORE OPERATING YOUR

UNIT. Compare the illustrations to your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

MULCHING BLADES

As a standard feature, tile impeller on your blower also functions as a mulcber. When using the vacuum attachment, the impeller/mulcher automatically reduces debris at a ratio of up to 16:1.

Cord Retainel

Top Handle

ON/OFF

 

Switch

Collection Bag

Rear Handle

Inlet Cover Latch

Blower Tube/Nozzle

Inlet Restrictor _'_

Upper Vacuum Tube

Lower Vacuum Tube

ON/OFF SWITCH

The ON/OFF SWITCH is used to activate the motor.

INLET COVER LATCH

The INLET COVER LATCH is used to open and close the inlet cover.

STOPPING YOUR UNIT

To stop the unit, move the ON/OFF switch to the OFF (0) position.

STARTING YOUR UNIT

Your unit has two run positions, LOW speed (1) and HiGH speed (2). Move

the switch to one of these positions to turn on the unit.

SWITCH POSITIONS

1 = LOW SPEED

0 = OFF

2 = HIGH SPEED

_WARNING:

Do not use the unit

without the tubes or collection bag properly attached to avoid flying debris and/or impeller contact which can cause serious injury= Always wear eye

BLOWER TUBE/NOZZLE

The BLOWER TUBE/NOZZLE is de- signed to direct the flow of air.

INLET RESTRICTOR

The INLET RESTRICTOR improves the blower function.

protection to prevent rocks or debris from being blown or ricocheting into the eyes and face which can result in blindness or serious injury.

OPERATING POSITION

Eye Protection

Eye Prol_ection

BlowerVacuum

USING YOUR UNIT AS A BLOWER

_bWARNING:

Inspect the area be-

fore using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown, or otherwise cause injury or damage during operation.

Use your unit as a blower for:

Sweeping debris or grass clippings from driveways, sidewalks, patios, etc.

8

Page 8
Image 8
Craftsman 358.799432 Knowyourelectric Blower, Mulching Blades, Inlet Cover Latch, Stopping Your Unit, Starting Your Unit