SWEEPERS WITH A SINGLE HITCH TUBE

NOTE: The dethatcher attaches to the sweeper's offset tube. This prevents you from offsetting the sweeper.

•Assemble the four bearings to the two spacers and then slide each through a clamp.

 

CLAMP

BEARING

BEARING

SPACER

FIGURE 7

•Attach each of the bearing, spacer, and clamp assemblies to a mount bracket using a 1/2 x 3-1/2" hex bolt and 1/2" nylock jam nut.

•Fasten each clamp to the spring mount frame assembly using one 5/16 x 1-3/8" clevis pin, 5/16" washer, and 3/32" hair cotter pin.

5/16 x 1-3/8"

CLEVIS PIN

5/16" WASHER

3/32" HAIR COTTER PIN

FIGURE 9

•Secure the two mount brackets to the inner holes of the drawbar offset tube of the sweeper using two 5/16 x 2-1/2" hex bolts and 5/16" nylock nuts.

5/16" x 2-1/2"

HEX BOLT

5/16" NYLOCK NUT

FIGURE 10

1/2 x 3-1/2" HEX BOLT

FIGURE 8

1/2" NYLOCK JAM NUT

•Place the double transport hook onto the sweeper hitch tube. Lift up the front of the dethatcher and slide it into the double hooks to secure it in the transport position.

DOUBLE TRANSPORT HOOK

FIGURE 11

6

Call 1-866-576-8388 for missing parts or assembly help

 

DO NOT RETURN TO STORE