STEP 10: (SEE FIGURE 11)

•Raise the tractor's hood.

•Insert the ends of the front brace rod into a set of holes in the U-tube and then swing the rod down to rest the bottom of the brace rod on top of the dash panel. To increase the effective support length of the rod, move the ends of the rod to the inner set of holes in the U-tube.

STEP 11: (SEE FIGURE 12)

•With the tractor's hood still raised, place the snow cab canopy onto the tubing frame and drape the front fl ap down in front of the tractor's dash panel. Lower the hood, trapping the front fl ap under the hood. Secure the sides of the canopy by fastening the elastic hooks to the bottom edge of the footrest and fender. Tie the straps at back of canopy to the upright tubes. Any levers or handles on snow throwers or snow blades should be located outside of the cab.

TIE STRAPS

 

 

LOWER

 

 

 

 

HOOD

RAISE HOOD

FRONT BRACE ROD

 

FRONT FLAP

 

 

FIGURE 11

ELASTIC HOOK

FIGURE 12

8