AssemblevinylcapsontotheendsoftheR,H,and | AssembletheHitchBracketstotheHitchControl |
LH, HitchTubes,Seefigure1, | Tubeusingtwo1/4"x 1o3/4"hexboltsand1/4"nuts, |
AssembletheR,H,HitchTubetothespreaderframe | Tighten,Seefigure3, |
tubeusingtwo1/4"x 2"hexboltsand1/4"nuts,Do | Assemblethehitchpinthroughthehitchbracketsand |
nottightenyet. RepeatforLH,HitchTube,See | securewiththe1/8"haircotterpin,Seefigure3, |
figure1, |
|
_114"NUT
114"×2"
HEXBOLT
FIGURE1
Assemble the Hitch Control Tube between the Hitch Tubes using two 1/4" x 1o3/4" hex bolts and 1/4" nuts, Tighten all bolts and nuts See figure 2,
114" NUT
HmTCR PUN
_ 1/4" x 1o314"
/ HEX BOLT
FIGURE 3
oAssemble the vinyl cap onto the Hitch Control Tube,
See figure 4,
®Assemble the Control Cable to the Hitch Control Tube
using the carriage bolt and nylon wing nut, See figure 4,
CARRmAGE BOLT
114"× 1o3/4"
HEX BOLT
FIGURE 2 | FIGURE 4 |