Product
Identification
WARNING: Failure to posi- tion the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance may result in property damage or personal injury.
Log Set
Assembly
Grate
Ceramic | Chassis | |
Burner | ||
|
Figure 1 - Product Identification (Ramp
Pan Burner)
Installation
WARNING: Before installing in a solid fuel burning fireplace, the chimney flue and firebox must be cleaned of soot, creo- sote, ashes and loose paint by a qualified chimney cleaner. Creo- sote will ignite if highly heated. A dirtychimneyfluemaycreateand distribute soot within the house. Inspectchimneyfluefordamage. If damaged, repair flue damper before operating appliance.
NOTICE: Installation, service and repair of this appliance must be performedbyaqualifiedinstaller, service agency, company or gas supplier experienced with this type of gas appliance. Only factory authorized components listed in these instructions may be used in accordance with the manufacturer's instructions and all codes and requirements of the authority having jurisdiction. Any modifications to or use of unauthorized components or accessory items will void the manufacturer’swarrantyandmay result in a hazardous condition.
CHECK GAS TYPE
Use only natural gas. If your gas supply is not natural gas, DO NOT install this gas log set.
If the fireplace does not have a gas supply shutoff valve, one must be installed.
WARNING: This appliance is equipped for natural gas. Field conversion is not permitted.
FLUE OPENING SPECIFICATIONS
Note: This vented appliance must be installed only in a
The charts in Figure 2, page 6 indicate technical information regarding the installation of your gas log set. Please make sure that all of the specifica- tions shown are applicable before installation is attempted.
The fireplace must include a flue and venting system with the minimum openings shown in Figure 2, page 6.
