SAFETY INFORMATION
Continued
1.This appliance, as supplied, is for use with NATURAL GAS ONLY. This appliance is NOT convertible for use with other gases.
2.If you smell gas
•shut off gas supply
•do not try to light any appliance
•do not touch any electrical switch; do not use any phone in your building
•immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions
•if you cannot reach your gas supplier, call the fire department
3.Never install the log set
•in a recreational vehicle
•where curtains, furniture, clothing or other flammable objects are less than 42" from the front, top or sides of the log set.
•in high traffic areas
•in windy or drafty areas
4.Before installing in a solid fuel burning fire- place, the chimney flue and firebox must be cleaned of soot, creosote, ashes and loose paint by a qualified chimney cleaner. Creosote will ignite if highly heated. Inspect chimney flue for damage. If damaged, repair flue before operating appliance.
5.You must operate this log set with fireplace screen in place and fully closed.
6.This log set is designed to be smokeless. If logs ever appear to smoke, turn off appliance and call a qualified service person. Note: During initial operation, slight smoking could occur due to log curing and the burning of manufacturing residues. You may wish to add more ventilation by opening a window.
7.To reduce the creation of soot, follow the instruc- tions in Cleaning and Maintenance, page 10.
8.The installation and provisions for combustion and ventilation air must conform with the Na- tional Fuel Gas Codes, ANSI Z233.1/NFPA 54, Section 5.3, Air for combustion and Ventilation.
9.Do not run log set
•where flammable liquids or vapors are used or stored
•under dusty conditions
10.Do not burn solid fuel in the fireplace after installing the log set. Do not use this log set to cook food or burn paper or other objects.
11.To help prevent breakage, new logs must be
12.Do not use heater if any part has been exposed to or under water. Immediately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.
13.Turn log set off and let cool before servicing, installing or repairing. Only a qualified service person should install, service or repair log set.
14.Provide adequate clearances around air openings.
Local Codes
Install and use log set with care. Follow all local codes. In the absence of local codes, use the lat- est edition of the National Fuel Gas Code ANSI Z223.1/NFPA 54*
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Battery march park
Quincy, MA 02269
Unpacking
CAUTION: Do not remove the data plates from the grate as- sembly. The data plates contain important warranty and safety information.
1.Remove logs, hearth kit, pan materials and hardware from carton.
2.Remove all protective packaging applied to logs and base for shipment.
3.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought appliance.
www.desatech.com114370-01D
