•Place the hose hanger rod assembly down into the
hose hanger bracket on the impeller housing assem-
bly. See figure 18.
• Loop the 25" tarp strap under the hose. Fasten the
hooks to the hose hanger rod assembly. See figure
20.
HOSE HANGER
ASSEMBLY
FIGURE 18
©
HOSEHANGER
ASSEMBLY
\25" TARP
STRAP
FIGURE20
©
• Place a hose clamp onto the end of the hose. Push
the hose onto the hose adapter (nozzle). Tighten the
hose clamp onto the hose and hose adapter. Do not
collapse the hose adapter when tightening the
clamp. See figure 19.
• The remaining hose clamp will be used later to fasten
the hose tothe deck adapter.
HOSE ADAPTER
CLAMP
HOSE
• Assemble the hitch plate to the tractor hitch if:
a. Your tractor has a square (straight) hitch frame,
to help prevent binding.
b. Your tractor has a lightweight hitch frame that
needs reinforcement for towing.
Use a 1/2" x 1-1/4" hex bolt, a 7/16" flat washer and a
1/2" hex lock nut. See figure 21.
1/2" x 1-1/4"
HEX BOLT
TRACTOR !
HITCH FRAME QATTACH
(SQUARE) UMOW-N-VAC
HERE
7/16
I_"HEX LOCK NUT
HITCH I
PLATE
TRACTOR iJ l/
HITCH FRAME _-_._ s_ --s_: Y
(TAPERED) :_- °
FIGURE 19 FIGURE 21
14