Craftsman 486.24535 Clean off after each use, Oil pivot points as needed, Store in a dry location

•Move the lift lever backward to lower the sleeve hitch.

•Attach an implement using the sleeve hitch pin. Tighten the stabilizer bolts against the implement hitch and then tighten the jam nuts.

IMPORTANT: Some implements may require that the stabilizer bolts not be tightened. Refer to your implement owner's manual.

•Use the 5/16" x 1-3/4" carriage bolt to adjust the depth so that the attached implement is level front to back during operation.

•Clean off after each use.

•Oil pivot points as needed.

•Store in a dry location.

To remove the entire Sleeve Hitch attachment,

remove the 5/8" x 1-3/4" hex bolt and 5/8" nylock nut which fasten the bottom of the sleeve hitch to

the tractor hitch, then lift the attachment of the tractor.

To tow an implement that has a tow hitch, simply remove the three clevis pins and then remove the Sleeve Hitch Lift Assembly from the Sleeve Hitch Frame Assembly.

6