TOOLS REQUIRED FOR ASSEMBLY
(1) 3/4" Wrench or Adiustable Wrench
(1) 11/16' Wrench or Adjustable Wrench
(1) 5/8" Wrench or Adjustable Wrench
(2) 9/16" Wrenches or Adjustable Wrenches
(2) 1/2" Wrenches or Adjustable Wrenches
Remove the hardware pack and all parts from the
carton. Be sure the carton is empty before discard-
ing,
Lay out ell parts and hardware as shown on page 3.
FOR TRACTORS RESEMBUNG FIGURE 1:
Removethe boltfrom the hole on each side ofthe
tractorframe as shownin figure1.
Assemblethe two shoulderboltsto the now empty
holes.Tighten. See figure 1,
SHOULDER BOLT
FIGURE 1
FOR TRACTORS RESEMBLING FIGURE 2:
Removethe boltand nut from the hole on each side
ofthe tractor frame as shownin figure 3,
Assembletwo shoulder boltsand 3/8"flanged lock
nutsto the now empty holes.Tighten. Seefigure 3.
SHOULDERBOLT
,3/6.FLANGED
_LOCKNUT
FIGURE 3
Assemblethe right and leftmounting bracketsto the
hitchbracket usingfour 5/18' x 3/4" hex bolts and
5/16" hex locknuts, Do not tighten yet. See figure4,
LEFTHAND
MOUNTINGBRACKET_J _14a.Mm,,
RIGHTHAND _ J 5/16"x 3/4"
MOUNTINGBRACKET_ 1.7 HE)(BOLT
FIGURE 4
Assemble the righthand and left hand mounting
bracketsto the hitch bracket usingfour 5/16" x 3/4"
hex bolts and 5/16" hex lock nuts.Do not tighten
yet. See figure 2.
LEFTHAND
MOUNTING _ 5/16.HE)(
HITCHBRACKET dl . / 5/16.x 3/4"
7L/ HEXBOLT
RIGHTHAND
MOUNTING
BRACKET
FIGURE 2
FOR BOTH TYPES OFTRACTORS
Assemblethe brace strapto the mounting brackets
usingtwo 5/16' x 3/4" he:<bolts and 5/16" hex lock
nuts. Do not tighten yet. See figure 5.
Assembletwo 3/8" x 1• hax bolts, bushingsand 3/8"
flangedlock nutsto the slots inthe hitch bracket. Do
not tighten yet. See figure 5.
5/6. x1" 5/16"x3/4"
HE)(BOLT_,_tl HEX BOLT
BRACESTRAP __*
FIGURE 5
4