ACCESSORIES
For availability of all accessories and attachments, refer your local Sear center.
! WARNING Use only Craftsman,
property damage.
Drywall Cutting Bit | Tile Cutting Bit |
When using a template (outlet box) behind the drywall, cut in a counterclockwise direction.
High Speed Router Bits
For routing, inlaying and mortising in wood and other soft materials. Use only with Craftsman Router Attachment or Shape/Router Table.
Mandrels
A mandrel is a shank with a threaded or screw head used with polishing accessories, cutting wheels, sanding discs and polishing points. The mandrel is a permanent shank, allowing for replacement of the worn head when necessary.
Screw Mandrel
For use with the felt polishing 1/8" shank tip and felt polishing wheels.
Aluminum Oxide Grinding
Stones (red/brown)
These grinding stones 1/8" shank come round, pointed or flat
and are made of aluminum
oxide. Use them for every possible grinding operation: sharpening lawn mower blades, screwdriver tips, knives, scissors, chisels and other cutting tools. Use to remove flash from metal castings, deburring any kind of metal. These grinding stones can be resharpened with a dressing stone. In machine shops, high speed drills and cutters are normally ground with aluminum oxide wheels.
For use with wall tile, cement board and plaster.
Start the bit into the material at a 45° angle and then slowly bring it to a 90° angle to
Multipurpose Cutting Bit
For use in wood, plastics, drywall, fiberglass, vinyl or aluminum siding, acoustical tile and laminates.
Start the bit into the material at a 45° angle and then slowly bring it to a 90° angle to begin the cut.
Small Screw Mandrel |
| |
Mandrel has a small screw | 1/8" shank | |
at the tip and is used with | ||
emery and fiberglass cutting |
| |
wheels, sanding discs and |
| |
polishing wheels. |
|
|
Threaded Tip Mandrel |
| |
Mandrel has a threaded tip | 1/8" shank | |
which threads | into the | |
polishing point accessory |
| |
#427. |
|
|
Silicon Carbide Grinding |
| |
Stones (blue/green) | 1/8" shank | |
Tougher than | aluminum | |
oxide points, these are made especially for | ||
use on hard materials such as glass and | ||
ceramics. |
|
|
Diamond Wheel Points |
| |
Used for fine detail work on | 3/32" shank | |
wood, jade, ceramic, glass | ||
and other hard material. Bits |
| |
are covered with diamond |
| |
particles. |
|
|
16
