Craftsman 580.327071 owner manual Yearly, Check oil bevel, Replace in-line ue!filter

CUSTOMER RESPONSIBILmES

o Clean the screen with a commercial cleaning solvent. o Inspect the screen and replace if torn, perforated or

otherwise damaged. DO NOT use defective screen.

,,Reattach screen with four screws..

CLEAN ENGINE COOLING SYSTEM

Continued operation with a clogged engine cooling system can cause severe overheating and possible engine dam-

age. Fig 19 shows the blower housing removed and areas to be cleaned. Clean these areas every 100 hours of

operation or once annually, whichever comes first.

F1G_ 19

SERVICE RECOMMENDATIONS

				HOURLY		OPERATING	INTERVAL
MAINTENANCETASK		EVERY8		25 HOURS OR' 50 HOURS OR 'I100 HOURS OR
		HOURS	OR
		BEFORE	USE	YEARLY	i	YEARLY	I	YEARLY
								YEARLY
1	Check oil bevel	X
2	Change engineoil				t	NOTE1	i
					1	NOTE2	1
								×
3	Change oil filter				1		J
4	Service aircleaner			NOTE2				X
				NOTE3	f
5. Cfean cooling system					I			NOTE3
6	Inspect!cleanspark arrestor and					X		X
muffler
7	Replace/clean spark plug	]	t	........	i	X		X
8	Replacein-line[ue!filter	;
9	Prepare for storage __	t	Prepareunit for storage if it is to remain idle longer than 30 days ,

NOTE 1: Change oil after first 8 hours, then after every 50 hours or yearly

NOTE 2: Change sooner when operating under heavy toad or high ambient temperature

NOTE 3: Ciean more often under dusty conditions or when airborne debris is present

12