KNOW YOUR HIGH PRESSURE WASHER

Read this owner's manual and safety rules before operating your cleaning system. Compare the illustrations with your cleaning system to familiarize yourself with the locations of various controls and adjustments.

System Rinse, Detergent and

Dial-A-Cleaner TM

Selector Knob

Gas Cap.

Throttle Control

Air

Choke Lever

Water Inlet

Adjustable Nozzle

Chemical Reservoirs with

Internal Filter and Baffle

Spray Gun

High Pressure Hose

Oil Fill Cap

High Pressure Outlet

Pump

Adjustable Nozzle - Adjust for high or low pressure; narrow or fan spray.

Air Filter - Dry type filter element limits theamount of dirt and dust that gets in the engine.

Choke Lever- Used to start a cold engine.

Dial-A-Cleaner TM Selector Knob - Selects any one of three chemicals or the clean water system rinse.

Gas Cap - Fill engine with regular unleaded gasoline here.

High Pressure Hose - Connect one end to the spray gun and the other to the high pressure outlet.

High Pressure Outlet - Connection for'high pressure hose.

Oil Fill Cap - Fill engine with oil here. See page 7 for oil recommendations.

Pump - Develops high pressure water.

Spray Gun - Controls the application of water onto

cleaning surface with trigger device, includes safety latch.

System Rinse, Detergent and Chemical Reservoirs with Internal Filter and Baffle - Used to provide

detergent or other chemicals to the low pressure water stream.

Throttle Control - Use to set the engine in starting mode. Stops a running engine.

Water Inlet - Connection for garden hose.

5

Page 5
Image 5
Craftsman 580.768020 manual Know Your High Pressure Washer, Gas Cap Throttle Control