TOOL USE AND CARE
• Store idle tools out of reach of children
and other untrained persons. Tools are
dangerous in the hands of untrained
users.
•Maintain tools with care. Properly
maintained tools are less likely to bind
and are easier to control.
•Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
tool's operation. If damaged, have the
tool serviced before using. Many
accidents are caused by poorly
maintained tools.
Use only accessories that are
recommended by the manufacturer for
your model. Accessories that may be
suitable for one tool may create arisk of
injury when used on another tool,
SERVICE
• Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel may result in arisk of injury.
• When servicing a tool, use only identical
replacement parts. Follow instructions in
the maintenance section of this manual.
Use of unauthorized parts or failure to
follow maintenance instructions may
create a risk of electric shock or injury.
CARTON CONTENTS
• Storage Case
• Buffer/Polisher
•Terrycloth Bonnets (3)
•Wax Applicator Bonnets (5)
AVAILABLE ACCESSORIES
Item
Polishing bonnet (1)
Terrycloth bonnets (2)
Wax applicator bonnets (4)
Cleaner/Glaze (8 oz.)
Clear Pro TM Wax (8 oz.)
Wax(8 oz.)
Stock#
10604
10603
10609
10996
10995
10998
Before you begin, make sure your car is
clean and dry. The work area should be dry
also. If necessary, remove road tar with a
general cleaner before polishing. Also,
remove excess grease spots, bug stains, etc.
NOTE: The Wax & Polishing Solution
containers shown in the illustrations are
representative. Yours may look different,
A
Place the b/ue wax app/icator bonnet on
pad as shown. Make sure the elastic is
tucked down securely and evenly arour_d
the underside of the pad.
B FOR PASTE WAX
Spread about a heaping teaspoonful of wax
evenly over the entire surface of the wax
app/icatorbonnet. Use a putty knife or any
flat object. DO NOT APPLY WAX DIRECTLY
TO CAR.