MAINTENANCE
CHANGING AND CLEANING FILTERS
!WARNING
Turn the power switch “OFF” and unplug the power cord from its power source prior to any maintenance.
Fig.
A
1.Disconnect machine from power source.
2.Lift up and pull out on the bottom of the electro- static filter (A). See figure
Fig.
B
3.Remove the
See figure
4.Install both filters in the reverse order in which they were removed. NOTE: Make certain the AIRFLOW arrow on each fitler is pointing inward toward the rear of the Air Cleaner.
5.Both the electrostatic filter and the
it should be cleaned. The
The electrostatic filter can be cleaned in one of three methods. Method one is using a
!WARNING
Compressed air can be dangerous. For operator safety, DO NOT exceed an air pressure of 30 PSI or point air nozzle toward anyone or aim nozzle at your own body. Always wear safety glasses and dust mask when performing this procedure.
LUBRICATION
The Air Cleaner has sealed lubricated bearings in the motor housing that do not require any additional lubrica- tion from the operator.
CAUTION: DO NOT USE FLAMMABLE MATERIALS
to clean Air Cleaner.
!WARNING
Repairs to the Air Cleaner should be performed by trained personnel only. Contact your nearest Steel City Authorized Service Center for authorized service. Unauthorized repairs or replacement with
17