Craftsman 358.792403 Knowyouredger Attachment, Blade, Operating the Coupler, Removing Attachment

KNOWYOUREDGER ATTACHMENT

READ THiS OPERATOR'SMANUAL AND SAFETY RULES BEFORE OPERATING YOUR EDGER A'F]-AOHMENT,Compare the illustrations with your attachment to familiarize

yourself with the location of the various controls and adjustments. Save this manual for future reference.

Depth Adjustment Knob Hanger j

Shaft

Blade Shield

Wheel

Gearbox

BLADE

The BLADE is designed to cut sod.

Edger Blade

DEPTH ADJUSTMENT KNOB The DEPTH ADJUSTMENT KNOB is

used to adjust the wheel for blade cut- ting depth.

OPERATING THE COUPLER

Your powerhead is equipped with a coupler which enables optional attach-

ments to be installed. The optional attachments are:

Cultivator ............ 358.79241

Blower ..............358.79242

Pruner ..............358.79245

Brushcutter* ......... 358.79244

*not designed for use with electric powerheads

,_ WARNING: Always disconnect

powerhead spark plug (or disconnect powerhead from power source) before removing or installing attachments.

REMOVING ATTACHMENT

CAUTION: When removing or instal-

ling attachments, place the power- head and attachment on a flat surface

for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Upper Shaft

Coupler

Attachment

TIGHTENKnob

2.Press and hold the locking/release button.

Locking/Release Button

Upper Shaft

Attachment

3.While securely holding the upper shaft, pull the attachment straight out of the coupler.

INSTALLING ATTACHMENT

1.Remove tile shaft cap from the at- tachment (if present) and discard.

2.Position locking/release button of attachment into guide recess of up- per shaft coupler.

7